Why is My Wi-Fi Continuously Disconnecting?
Why is My Wi-Fi Continuously Disconnecting?
Blog Article
There can be multiple connectivity issues with your Setek WiFi extender. Due to these issues, your Setek Wi-Fi extender is continuously disconnecting. To resolve this issue, you can try out the troubleshooting tips we have shared in the blog to help you resolve it effectively. So, let's dive straight in.
Possible Causes
Interference - Due to the interference like WiFi channels, electronic devices and thick walls, and any other solid material.
Outdated Firmware - If your Setek extender WiFi extender has an outdated Firmware, then
It can create connectivity issues.
Weak Signals From Router - If your Setek extender received weak signals from the router, then it cannot provide good signals.
Damaged Cable - Damaged and faulty cables can stop the transmission of signals.
Device Issue: Try to connect another device to the Setek extender, if it connects, it means there is a problem with your older device.
Troubleshooting Tips
Remove Interference
Check for any interference between the range of the extender or near to extender, if there is any. Relocate the extender far from that interference.
Check Connections
To troubleshoot cable and wireless connections, check all physical connections, restart the router and modem, and ensure the device is within range of the wireless signal. Use these troubleshooting tips to troubleshoot your network.
- Ensure the location of the Setek WiFi extender setup, and position the extender within the range of the existing router.
- Also, check that your device is within the range of the Setek WiFi extender or router.
- See all the wires; no physical damage is in the cables or ports. And all the cables are connected correctly.
- Verify that you are using the correct SSID and password to connect the device to the extender.
Update Firmware
Outdated Firmware decreases the functionality and security of the Setek extender. So it is very important to update the Firmware timely. The right steps to update the Firmware.
- Navigate to the web browser on your device.
- Don’t forget to attach the device to the Setek extender.
- Type IP addresses 192.168.10.1 into the address bar.
- Perform a login and go to the setup interface.
- Open the Advanced Settings and update latest Firmware.
Note: There shouldn’t be a power cut while updating the Firmware or Setek WiFi extender setup.
Restart Extender
Due to different minor technical issues, your Setek WiFi extender continues to disconnect. To rectify these minor issues, you can restart your Setek Extender or other network devices. Simply turn off the devices and power them up after a few minutes.
Reset Extender
Sometimes users do not understand the problem, and they follow all the methods to resolve issue but not successful. If you are also in this situation, then you need to reset your Setek extender to restore it default factory settings. To reset, use the reset button present on the extender.
Conclusion
By using the outlined troubleshooting steps, such as relocating the extender, checking the network connection, updating the Firmware, and resetting extender extender. You can solve your issues related to Setek wifi extender constantly disconnecting and improve your home network for seamless coverage.
FAQs
Can I connect Setek Extender directly to the modem?
No, you can connect the Setek extender directly to the modem. It can be connected only to a router. Yes, in case your modem is configured in router mode, you will be able to connect to the modem directly.
How to set up the Setek extender in AP (Access Point) Mode?
Steps to set up the Setek extender in AP mode;
- Launch web browser on the device.
- Access interface using the default login info.
- Once come to the interface, select the AP Mode option.
- Configure further settings of the extender.
- Now your Setek extender is set in AP mode.
Is the Setek extender suitable for outside weather?
It depends on the model of the Setek extender. If it has feature of weatherproof feature, then you can use it outside the home. Report this page